Clean air is vital to all combustion processes. The prime function of an inlet filter system is to protect the gas turbine from pollutants in the air, as particles entering can cause costly damages like erosion, corrosion and fouling. Erosion is a permanent degradation, mainly caused by coarse particles,
while corrosion is caused by salt in combination with sulphur, and high temperatures. Smaller particles cause fouling of turbine blades, and thus affecting performance negatively. A secondary effect is an increase in temperatures, as heat transfer effectiveness is reduced, and ultimately the life of the hot section. Effective capture of particulate and airborne salt is therefore of vital importance for long and efficient operation. If not removed by the inlet system, particles will force operators to more frequently water wash the compressor, either by unnecessary on-line washing or during costly shut downs.
It is also important to understand the complexity of differentiating air filters. Most air filters remain in a system for months or even years. During this time, the filter will experience several environmental variations like changes in temperature, humidity, airflow velocity and particle load. To prevent this, and make sure our filters withstand the severe real life conditions once in operation
进气过滤系统的主要功能是保护燃气轮机免受空气中的污染,如颗粒进入会造成大的造价损害,如腐蚀或污垢。腐蚀是一种长久性的退化,主要是由大颗粒引起的,而腐蚀则是由盐与硫的结合和高温引起的。较小的颗粒会引起涡轮叶片的污垢,从而对涡轮的性能产生不利的影响。二次效应是温度升高,传热效率降低,会导致热寿命的延长。
因此,有效捕获微粒和空气中的盐对于长期有效运作至关重要。如果不被入口移除系统中,粒子会迫使操作者更频繁地用水冲洗压缩机,要么通过不必要的在线清洗,要么在昂贵的停机期间。所以匹配空气过滤器是很重要的。大多数空气过滤器在一个系统中停留数月甚至几年。在此期间,过滤器将经历几种环境变化,如温度、湿度、气流速度和颗粒负荷的变化。为了防止这一切,而且确保我们的过滤器一旦投入运行就能承受恶劣的现实条件;
以上空气过滤器技术参数金科过滤器通过第三方机构认证公司进行测试并提供检测报告。
These are general recommendations for gas turbine air inlet systems.
这些是燃气轮机进气系统的一般建议
Generally, the international common size (24“ × 24 "or 592 × 592mm) filter, and take this ruler as the modulus, change the filter to 2 × 2、3 × 2、3 × Third order matrix arrangement; The filter technical parameters are generally divided into the following three types, which can be matched and designed according to the different needs of customers.
通常以国际通用尺寸(24"×24" 即592×592mm)过滤器,并以此尺⼨为模数,将过滤器以2×2、3×2、3×3等矩阵排列;过滤器技术参数通常分为以下三种,具体可根据根据客⼾不同的需求来匹配设计。
一级初效过滤器:过滤等级G4,通风量3400CMH,初始风压≤40Pa;容尘量1700g.
二级中效过滤器:过滤等级F8~F9,通风量3400CMH,初始风压≤130Pa;容尘量900g.
三级高效过滤器:过滤等级H12~H13,通风量3400CMH,初始风压≤250Pa;容尘量800g
优势:
可制作不同过滤效率等级,适用不同的客户要求.
芯片采用美国设备全自动折叠以及国内先进设备全自动电脑控制系统进行喷胶成型.
有效面积大、阻力低、使用寿命长.
结构:箱式、单法兰、双法兰.
耐湿:100%RH.
材质:
外框:ABS塑料框、各种不锈钢
滤料:高防水玻璃纤维滤纸.PTFE.纳米材料等
分隔物:热熔胶(环保无气味)
密封胶:聚氨酯
