Wi-Fi7-改善你的OpenWrtOne开源路由器

开源不如不打烊 2024-11-01 05:20:50

需要:

OpenWrt一m2 MTK mt7925 或 QCA WCN7850 ath12k - 均支持 80211BE 6GHzM2 M 至 A+E 适配器天线钻机(6.5 毫米)

安装最新的 OpenWrt 主程序(启用驱动程序),您就拥有了完全开源的路由器,支持 802.11BE 和 6GHz。测试了 mt7925 和 wcn7850 卡。

你可以花大约 100 欧元买到它 - 效果非常好 :)

luci 展示的内容:

Intel BE200/AX210 与 MT7925 连接测试(AP 内部为 ath12k):

janusz@e850:~/github/wifi_tests/tests/remote$ ./run-tests.py -c cfg-janusz.py -d one -r be200 -t connect_allDUT: oneREF: be200RUN check_devicesPASSSTART - connect_all (1/1)PASS ( (5g/36/HE80): ping pkt loss ap->sta: 0%, sta->ap: 0% (6g/1/EHT320): ping pkt loss ap->sta: 0%, sta->ap: 0% (2g/1/HE20): ping pkt loss ap->sta: 0%, sta->ap: 0%) - 71.748851sjanusz@e850:~/github/wifi_tests/tests/remote$ ./run-tests.py -c cfg-janusz.py -d one -r mt7925 -t connect_allDUT: oneREF: mt7925RUN check_devicesPASSSTART - connect_all (1/1)PASS ( (5g/36/HE80): ping pkt loss ap->sta: 0%, sta->ap: 0% (6g/1/EHT320): ping pkt loss ap->sta: 0%, sta->ap: 0% (2g/1/HE20): ping pkt loss ap->sta: 0%, sta->ap: 0%) - 64.269238sjanusz@e850:~/github/wifi_tests/tests/remote$ ./run-tests.py -c cfg-janusz.py -d one -r ax210 -t connect_allDUT: oneREF: ax210RUN check_devicesPASSSTART - connect_all (1/1)PASS ( (5g/36/HE80): ping pkt loss ap->sta: 0%, sta->ap: 0% (6g/1/EHT320): ping pkt loss ap->sta: 0%, sta->ap: 0% (2g/1/HE20): ping pkt loss ap->sta: 0%, sta->ap: 0%) - 70.073853s root@OpenWrt:~# iw devphy#2 Interface wlan2 ifindex 11 wdev 0x200000003 addr 00:03:7f:58:28:37 ssid OpenWrtOne type AP channel 1 (5955 MHz), width: 320 MHz, center1: 6105 MHz txpower 24.00 dBm multicast TXQ: qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets 0 0 12 0 0 0 0 1276 12phy#1 Interface wlan1 ifindex 13 wdev 0x100000003 addr 20:05:b6:ff:00:2b ssid OpenWrtOne type AP channel 36 (5180 MHz), width: 80 MHz, center1: 5210 MHz txpower 23.00 dBm multicast TXQ: qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets 0 0 21 0 0 0 0 2364 21phy#0 Interface wlan0 ifindex 12 wdev 0x3 addr 20:05:b6:ff:00:2a ssid OpenWrtOne type AP channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz txpower 20.00 dBm multicast TXQ: qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets 0 0 12 0 0 0 0 1276 12root@OpenWrt:~#

root@OpenWrt:~# ubus call system board{ "kernel": "6.6.54", "hostname": "OpenWrt", "system": "ARMv8 Processor rev 4", "model": "OpenWrt One", "board_name": "openwrt,one", "rootfs_type": "squashfs", "release": { "distribution": "OpenWrt", "version": "SNAPSHOT", "revision": "r27722-e00b6ba0c8", "target": "mediatek/filogic", "description": "OpenWrt SNAPSHOT r27722-e00b6ba0c8" }}root@OpenWrt:~# root@OpenWrt:~# cat /etc/config/wireless config wifi-device 'radio0' option type 'mac80211' option path 'platform/soc/18000000.wifi' option band '2g' option channel '1' option htmode 'HE20' option country 'GB'config wifi-iface 'default_radio0' option device 'radio0' option network 'lan' option mode 'ap' option ssid 'OpenWrtOne' option encryption 'sae-mixed' option key 'testtest12' option ifname 'wlan0'config wifi-device 'radio1' option type 'mac80211' option path 'platform/soc/18000000.wifi+1' option band '5g' option channel '36' option htmode 'HE80' option country 'GB'config wifi-iface 'default_radio1' option device 'radio1' option network 'lan' option mode 'ap' option ssid 'OpenWrtOne' option encryption 'sae-mixed' option key 'testtest12' option ifname 'wlan1'config wifi-device 'radio2' option type 'mac80211' option path 'soc/11280000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0' option band '6g' option channel '1' option htmode 'EHT320' option country 'GB'config wifi-iface 'default_radio2' option device 'radio2' option network 'lan' option mode 'ap' option ssid 'OpenWrtOne' option encryption 'sae' option key 'testtest12' option ifname 'wlan2'root@OpenWrt:~#
0 阅读:11

开源不如不打烊

简介:感谢大家的关注